<?php
ini_set('display_errors', 1);
// idcol 故障信息推送
require_once './DB.php';
require_once './config.php';
date_default_timezone_set('Asia/Shanghai');

$config = json_decode(file_get_contents('./db_config.php'),true);

// 发送邮件
function send_email($to,$msg,$title = '维修通知'){
    // $this->load->library('Smtp');
    require_once './Smtp.php';
    $config = array();
    $config['protocol'] = 'smtp';
	$config['smtp_host'] = 'smtpdm.aliyun.com';
	$config['user_email'] = 'admin@lampmind.com';
	$config['smtp_user'] = 'admin@lampmind.com';
	$config['smtp_pass'] = 'wecloudsSMTP2018';
	$config['smtp_port'] = 80;
	$config['smtp_timeout'] = 30;
	$config['crlf'] = "\r\n";  
	$config['newline'] = "\r\n";
	$config['mailtype'] = "html";

    //******************** 配置信息 ********************************
    // $config = $config['email'];
    $smtpserver = $config['smtp_host'];//SMTP服务器
    $smtpserverport = $config['smtp_port'];//SMTP服务器端口
    $smtpusermail = $config['user_email'];//SMTP服务器的用户邮箱
    $smtpemailto = $to;//发送给谁
    $smtpuser = $config['smtp_user'];//SMTP服务器的用户帐号，注：部分邮箱只需@前面的用户名
    $smtppass = $config['smtp_pass'];//SMTP服务器的用户密码
    $mailtitle = $title;//邮件主题
    $mailcontent = $msg;//邮件内容
    $mailtype = "HTML";//邮件格式（HTML/TXT）,TXT为文本邮件
    //************************ 配置信息 ****************************
    $smtp = new Smtp($smtpserver,$smtpserverport,true,$smtpuser,$smtppass);//这里面的一个true是表示使用身份验证,否则不使用身份验证.
    $smtp->debug = false;//是否显示发送的调试信息
    return $smtp->sendmail($smtpemailto, $smtpusermail, $mailtitle, $mailcontent, $mailtype);
}

// 故障信息 
$batstatusArr = array('1'=>'Overdischarge','2'=>'Over Charge','3'=>'High temperature','4'=>'Battery overtemperature');
$panelstatusArr = array('1'=>'Less than the optiocally controlled voltage','2'=>'greate than the optiocally controlled voltage','3'=>'greater than the battery voltage');
$lampstatusArr = array('1'=>'open circuit','2'=>'short circuit','3'=>'overload','4'=>'Lamp overtemperature');
$tempstatusArr = array('1'=>'Charge high temperature','2'=>'Charge over temperature','3'=>'Discharge high temperature','4'=>'Discharge over temperature');
$onlinestatusArr = array('1'=>'Offline failure');

while (1) {
	$beginTime = time();
	$beginDate = date('H:i',$beginTime);
	
	if (date('H:00',time() + 6*3600) == '09:00') {
		$db = new Db($config);
		$lampList = $db->query('select W.id,W.batstatus,W.panelstatus,W.lampstatus,W.tempstatus,W.onlinestatus,L.projectid,P.projectname,L.number,L.address,L.section,L.lighteness,L.lampvoltage,L.lampcurrent,L.lamppower,L.netstatus,L.softwareVersion,L.iccid,L.updatetime from warning_info_log W left join lampinfo L on W.lampid = L.id left join project P on L.projectid = P.id where W.is_send = 0 and L.id is not null and P.id is not null and W.status = 0');
		$temp_send = [];
		if (!empty($lampList)) {
			
			foreach ($lampList as $key => $value) {
				$userList = $db->query('select email,id from alarm_send_user_info where is_send = 1 and FIND_IN_SET('.$value['projectid'].',project)');

				// $msg = "The device located in project:{$value['hotelName']}->number:{$value['buildName']} appears <span style='color:red;'>{$value['stralarmtype']}</span>, please confirm as soon as possible. If repaired, please ignore it! Thank you for your cooperation! [login www.iotena-web.com to see details]";
				$alarmArr = array();
				if (!empty($value['batstatus']) && isset($batstatusArr[$value['batstatus']])) $alarmArr[] = $batstatusArr[$value['batstatus']];
				if (!empty($value['panelstatus']) && isset($panelstatusArr[$value['panelstatus']])) $alarmArr[] = $panelstatusArr[$value['panelstatus']];
				if (!empty($value['lampstatus']) && isset($lampstatusArr[$value['lampstatus']])) $alarmArr[] = $lampstatusArr[$value['lampstatus']];
				if (!empty($value['tempstatus']) && isset($tempstatusArr[$value['tempstatus']])) $alarmArr[] = $tempstatusArr[$value['tempstatus']];
				if (!empty($value['onlinestatus']) && isset($onlinestatusArr[$value['onlinestatus']])) $alarmArr[] = $onlinestatusArr[$value['onlinestatus']];
				if (!empty($alarmArr)) {
					$stralarmtype = implode(',',$alarmArr);
					$msg = '';
					$msg .= '<table border="1" cellpadding="2" cellspacing="0">';
					$msg .= '<tr>';
					$msg .= '<td>Project name</td>';
					$msg .= '<td>'.$value['projectname'].'</td>';
					$msg .= '<td>Lamp number</td>';
					$msg .= '<td>'.$value['number'].'</td>';
					$msg .= '<td>Wireless module address</td>';
					$msg .= '<td>'.$value['address'].'</td>';
					$msg .= '<td>Road</td>';
					$msg .= '<td>'.$value['section'].'</td>';
					$msg .= '</tr>';

					$msg .= '<tr>';
					$msg .= '<td>Brightness</td>';
					$msg .= '<td>'.$value['lighteness'].'%</td>';
					$msg .= '<td>Lamp voltage</td>';
					$msg .= '<td>'.$value['lampvoltage'].'V</td>';
					$msg .= '<td>Lamp current</td>';
					$msg .= '<td>'.$value['lampcurrent'].'A</td>';
					$msg .= '<td>Lamp power</td>';
					$msg .= '<td>'.$value['lamppower'].'W</td>';
					$msg .= '</tr>';

					$netstatus = $value['netstatus'] == 0 ? 'Not online' : 'Online';
					$updatetime = empty($value['updatetime']) ? date('Y-m-d H:i:s',time() - 4*3600) : date('Y-m-d H:i:s',strtotime($value['updatetime']) - 2*3600);
					$msg .= '<tr>';
					$msg .= '<td>Network status</td>';
					$msg .= '<td>'.$netstatus.'</td>';
					$msg .= '<td>Version information</td>';
					$msg .= '<td>'.$value['softwareVersion'].'</td>';
					$msg .= '<td>ICCID</td>';
					$msg .= '<td>'.$value['iccid'].'</td>';
					$msg .= '<td>Update time</td>';
					$msg .= '<td>'.$updatetime.'</td>';
					$msg .= '</tr>';

					$msg .= '</table>';
					$msg .= "The device located in project:{$value['projectname']}->number:{$value['number']} appears <span style='color:red;'>{$stralarmtype}</span>, please confirm as soon as possible. If repaired, please ignore it! Thank you for your cooperation!";
					foreach ($userList as $user) {
						if (!empty($user['email'])) {
							if (!empty($value['onlinestatus'])) {
								if ($value['netstatus'] == 0) {
									if (isset($temp_send[$user['id']])) {
										$temp_send[$user['id']]['msg'] .= $msg;
									}else{
										$user['msg'] = $msg;
										$temp_send[$user['id']] = $user;
									}
									// send_email($user['email'],$msg,'Alarm info');
								}
							}else{
								if (isset($temp_send[$user['id']])) {
									$temp_send[$user['id']]['msg'] .= $msg;
								}else{
									$user['msg'] = $msg;
									$temp_send[$user['id']] = $user;
								}
								// send_email($user['email'],$msg,'Alarm info');
							}
						}
					}
				}

				$db->table('warning_info_log')->where('id='.$value['id'])->update(['is_send'=>1]);
			}
		}
		$file = fopen('./alarm_info.txt', 'w+');
		
		if (!empty($temp_send)) {
			foreach ($temp_send as $key => $value) {
				fwrite($file, $value['msg'].'----'.date('Y-m-d H:i:s',time()).'
');
				fwrite($file, $value['email'].'----'.date('Y-m-d H:i:s',time()).'
');
				send_email($value['email'],$value['msg'],'Alarm info');
			}
		}
		fclose($file);
		$db->close();
	}
	$endDate = date('H:i',time());
	while ($beginDate == $endDate) {
		sleep(1);
		$endDate = date('H:i',time());
	}
}

?>
Project name	'.$value['projectname'].'	Lamp number	'.$value['number'].'	Wireless module address	'.$value['address'].'	Road	'.$value['section'].'
Brightness	'.$value['lighteness'].'%	Lamp voltage	'.$value['lampvoltage'].'V	Lamp current	'.$value['lampcurrent'].'A	Lamp power	'.$value['lamppower'].'W
Network status	'.$netstatus.'	Version information	'.$value['softwareVersion'].'	ICCID	'.$value['iccid'].'	Update time	'.$updatetime.'